  |
|
| Live Roller Curve Conveyor These low-cost V-belt driven 90° curves come equipped with fixed-speed motors for smooth and even product movement. Tapered rollers help maintain orientation as product goes around the curve.
|
Standard Specifications: Model 985 Live Roller Curve
| Degree:
90° Radius: 44" nominal outside radius for 18-¼" width, 61" for 24" width, 78" for 30" width Widths: 18", 24", 30" Frame: 3-½" deep, 10 gage channel painted steel, 1-1/8" flanges, 4-½" long straight sections at each end Center Drive: Mounted under the conveyor Speed: 60 fpm Motor: ½ hp C-Face, 208/230/460/480 volt, 60 cycle, 3 phase, totally enclosed |
Rollers:
Tapered 1-5/8" at the small end and 2-½" at the large end, 14 gage steel with
plated bearing shell, steel balls, unsealed and greased. End rollers are 1-5/8"
diameter 12 gage Axles: 7/16" hex steel on nominal 4-½" outside centers Belt: B-section "V" belt Supports: 24" to 36" adjustable floor support and 2-½" high spacing channel. (For conveying surface height, add frame depth.) Support at each end and a center leg in the middle. Diagonal braces at each end. For other support heights, see the Accessories: Supports page. Electrical Controls: See the Controls page. Capacity: 150 lb. per foot or 500 lb. total distributed live load on the curve |
| Optional Specifications: Motor: ½ hp, 115/230V, single phase |
|
