V-Bottom Belt Live Roller APC® Conveyor

Model 1274 Automatic Pressure Conveyor (APC) is a one direction cam operated roller accumulation conveyor. Roller driving force is supplied by a 4" wide V-bottom belt which is pressed against the rollers by cam assemblies. When a sensor roller is depressed, the pressure cams in the upstream zone stop flat side up and the belt drops away from the rollers thus permitting accumulation.

 

 

 

 

 

 

 

 

 

 

 

Standard Specifications: Model 1274 Live Roller

Width: 18-¼", 24-¼", 30-¼"

Frame: 6-¼" deep, 10 gage painted steel. 6' and 12' long bed sections

Accumulation Zones: 24" long

Center Drive: 8" diameter drive pulley with a 1-½" diameter shaft

Belt Take-up: 54" of manual screw take-up in center drive

Speed: 60 fpm

Motor: ½ hp C-Face, 208/230/460/480 volt, 60 cycle, 3 phase, totally enclosed

End Pulley: 4" diameter pulley with a 1" diameter axle

Rollers: Carrier and sensor - 1.9" diameter, 16 gage galvanized with plated bearing shell, steel balls, unsealed and greased

Axles: 7/16" hex steel on 3" or 4" centers

Cams: Exert belt pressure under carrier rollers on 6" or 8" centers

Belt: 4" wide V-bottom black PVC

Supports: 24" to 36" adjustable floor supports at each end and at bed joints. (For conveying surface height, add frame depth.) Diagonal braces at each end and an extra pair for conveyors over 50' long. For other support heights, see the Accessories: Supports page.

Electrical Controls: See the Controls page.

Guard Rail: See the Guard Rail page.