  |
|
| Line Shaft Conveyor The Model 1256 is a live roller conveyor on which carrier rollers are individually driven through belts from a "lineshaft." The lineshaft, consisting of interconnecting shaft sections, is completely enclosed within the bed sections of the conveyor. This transportation conveyor has a wider range of flexibility than conventional belt or chain driven live roller conveyors.
|
Standard Specifications: Model 1256 Line Shaft Conveyor
| Width:
18-¼", 24-¼", 30-¼" Frame: 7-½" deep, 10 gage painted steel. 10' long bed sections with bolted cross members Drive: In-line helical gear motor, ¾ hp; 208/230/460/480/575 volts, 60 cycles, 3 phase 60 fpm Drive Shaft: 1" diameter cold rolled steel, pillow block with delrin spools, spool clips and chain coupling. Safety yellow shaft guards Axles: 7/16" hex steel Belts: 3/16" diameter 83A durometer polyurethane |
Stop:
Air activated stop, complete with single 115 volt solenoid. Based on product weight, the
required maximum air pressure is 35 psi Brake: Air activated brake, complete with single 115 volt solenoid. Based on product weight, the required maximum air pressure is 35 psi Supports: 24" to 36" adjustable floor supports at each end and at bed joints. (For end conveying surface height, add 7-½" frame depth.) Diagonal braces at each end and an extra pair for conveyors over 50' long. For other support heights, see the Accessories: Supports page. Electrical Controls: See the Controls page. Guard Rail: See the Guard Rail page. |
